Effect of finite energy of intravalley acoustic phonons on the temperature of non-equilibrium electrons in a quantum surface

The effect of finite energy of intravalley acoustic phonons on the electric field dependence of the temperature of the non-equilibrium carriers in a quantum surface has been studied here. The calculations have been made, for a rather pure material, at low lattice temperature. Numerical results are obtained for GaAs and Si. The results are interesting being significantly different from what one obtains by neglecting the phonon energy.     

Beam profile measurement with CR-39 track detector for low-energy ions

A CR-39 track detector was successfully used to measure the outline of thin low-energy ion beams. After the etching, the surface of the detector was examined with an observation system composed of a Normarski microscope, a CCD camera and a digital image processing computer. Beam images obtained with the system were in good agreement on the outline of the beam formed with a beam aperture. Also, the resolving power in the beam outline measurement was roughly explained from the consideration of the ion range and the etch-pit growth in the chemical etching for the CR-39 detector.     

A Bulk Acoustic Wave Viscosity Sensor for Determination of Lysozyme Based on Lysis of Micrococcus Lysodeikeicus

 A method for determination of lysozyme with a Bulk Acoustic Wave (BAW) viscosity sensor is presented. It is based on the bacteriolytic action of lysozyme on Micrococcus lysodeikeicus (M. lysodeikeicus) and the response of the sensor to the viscosity and density change of this process. There was a good correlation between the frequency shift and the concentration of lysozyme in the range 10–100 μg/ml. The content of lysozyme in human saliva was determined by this method and the results obtained were in good agreement with those from the conventional turbidimetric method. This method has an advantage over the conventional turbidimetric method in that the amount of sample needed is smaller, the procedure is simpler and the concentration range of the bacterium suspension which can be used in the detection was extended. Received September 11, 1998. Revision March 15, 1999.     

Multi-mode opto-thermo-mechanical stretching system for determination of 3D refractive index along the axis of stretched and/or heated fibres

A multi-mode opto-thermo-mechanical stretching system was modified to study the changes in the 3D of optical and structural properties of stretched fibre along its axis. The structural deformation of isotactic Polypropylene, (iPP), fibres was studied at different draw ratios. The modified system coupled with Pluta polarising interference microscope was used to determine the variation of the birefringence in three dimensions during stretching process. Using this modified system, the multi-necking was detected. Subfringe analysis technique was used to determine the phase distribution of the obtained microinterferograms, which were given for illustration.     

复合深度神经网络在直升机声目标识别中的研究

针对直升机探测中目标运动过程连续识别的鲁棒性问题,提出了一种基于复合深度神经网络的直升机声学特征提取和识别框架。复合深度神经网络由卷积神经网络和长短时记忆神经网络以并行结构组合,进行直升机声学特征的优化,完成直升机类型识别。针对直升机声信号特性,对卷积神经网络进行了改进,使得该复合深度神经网络在信号短时谱基础上优化声信号特征表征并提取前后帧之间的相关信息,弥补通常声目标识别方法不能充分利用目标信号时间历程信息的缺陷。真实外场实验数据测试结果显示:相较于传统识别方法,该算法显著提升了直升机进入有效探测范围后连续识别的鲁棒性和目标识别正确率。     

光声池径向共振模式耦合系数理论分析

光声光谱法是基于红外吸收光谱原理的一种高灵敏度的微量气体探测技术。它使用声共振腔来实现微弱声信号的共振放大。通过调节激光的调制频率,当它等于腔的某个共振频率时,在腔内形成声驻波,而腔本身的作用相当于一声放大器。共振腔的放大作用取决于当前被激活的共振模式、腔的品质因素、声传感器的状态以及电磁辐射与腔共振模式的耦合作用。值得关注的是,红外激光相对于声共振腔的入射方位不同则激励产生的光声信号幅值也不同。采用理论推导与数值计算相结合的方法,以圆柱形光声池为例,研究了径向共振模式下耦合系数受激光入射方位的影响。研究表明,激光入射角在0～π/2范围变化时耦合系数存在2个零点和2个极大值：入射角为0或tan-1(0.859 2×2R/L)时,耦合系数为零而径向共振失效;入射角为tan-1(0.556 8×2R/L)或tan-1(2R/L)时,耦合系数极大而径向共振最强。此处R为池径而L为池长。结果可用于指导光声池结构优化设计与安装调试,增强光声法检测微量气体的信号幅值,提高检测灵敏度。     

Thermodynamic Performance Characteristics of a Brownian MicroscopicHeat Engine Driven by Discrete and Periodic Temperature Field

A Brownian microscopic heat engine with a particle hopping on a one-dimensional lattice driven by a discrete and periodic temperature field in a periodic sawtooth potential is investigated. In order to clarify the underlying physical pictures of the heat engine, the heat flow via the potential energy and the kinetic energy of the particles are considered simultaneously. Based on describing the jumps among the three states, the expressions of theefficiency and power output of the heat engine are derived analytically. The general performance characteristic curves are plotted by numerical calculation. It is found that the power output-efficiency curve is a loop-shaped one, which is similar to one for a real irreversible heat engine. The influence of the ratioof the temperature of the hot and cold reservoirs and the sawtooth potential on the maximum efficiency and power output is analyzed forsome given parameters. When the heat flows via the kinetic energy isneglected, the power output-efficiency curve is an open-shaped one,which is similar to one for an endroeversible heat engine.